蓝宝石冲击消光晶向效应的第一性原理

蓝宝石的冲击消光现象是高压领域中的研究热点.低压段(86 GPa范围内)的实验研究表明蓝宝石的冲击消光与晶向相关,但在高压段(压力范围:131255 GPa)是否也具有晶向相关性目前尚不清楚.为此,利用第一性原理方法,分别计算了八个不同晶向的蓝宝石理想晶体和含氧离子空位缺陷晶体在高压段的光吸收性质,结果发现:1)蓝宝石在高压段的冲击消光表现出明显的晶向效应,且该效应还随压力增大而增强;一步的数据分析可以看出,在冲击实验采用的波段内,a晶向的消光最弱(透明性最好),c晶向的消光最强与c晶向的消光接近,g晶向的消光要弱于s晶向的消光.鉴于此,如果在高压段开展加窗冲击波实验,建议选择a晶向或m晶向的蓝宝石作为其光学窗口.本文结果不仅有助于深入地认识蓝宝石在极端条件下的光学性质,而且对未来的实验研究有重要的参考作用.     

Eu^3+激活氟氧硼酸锗酸盐闪烁玻璃的发光性能

采用传统高温熔融法合成了玻璃组成为B2O3-GeO2-15GdF3-(40-x)Gd2O3-xEu2O3(0≤x≤10)的Eu^3+激活氟氧硼酸锗酸盐闪烁玻璃。在硼锗酸盐玻璃基质中,Gd2O3和GdF3稀土试剂的总含量高达55%,从而确保其密度高于6.4 g/cm^3。闪烁玻璃的光学性能通过光学透过光谱、光致发光光谱、X射线激发发射(XEL)光谱和荧光衰减曲线来表征。玻璃中Gd^3+→Eu^3+离子的能量传递通过激发光谱、发射光谱和Gd^3+-Eu^3+离子间距得到证明,同时也确定了在紫外线和X射线激发下Eu^3+激活氟氧硼酸锗酸盐闪烁玻璃的最佳浓度。Judd-Ofelt理论分析了玻璃中Eu―O键的共价性随Eu^3+掺杂浓度增加而显著增强。Eu^3+激活氟氧硼酸锗酸盐闪烁玻璃在80~470 K温度范围内荧光衰减曲线和发射光谱的温度依赖关系最终证实了其具有较好的发光稳定性。     

表面喷砂对有机玻璃沿面闪络性能影响

绝缘子表面粗糙处理是提升其沿面闪络性能的重要途径,表面粗糙化处理方式不当,极易带来表面结构不均匀,难以获得稳定耐压性能的绝缘材料。为提升绝缘子表面粗糙处理的均匀性,本文利用表面喷砂技术对圆柱形有机玻璃(PMMA)绝缘子进行了粗糙化处理研究,以球形二氧化硅(SiO2)颗粒为工作介质,研究了不同喷砂粒径、氢氟酸后处理等因素对绝缘材料表面形貌和组分的影响,并利用短脉冲高压测试平台对喷砂处理前后有机玻璃绝缘子样品进行了真空沿面闪络性能测试。研究结果表明,喷砂处理在有机玻璃表面形成了较为均匀的凹坑,HF酸能够有效去除表面残留的SiO2颗粒,具有表面喷砂粗糙结构的绝缘子沿面闪络电压得到了稳定提升,相较于未处理的绝缘子闪络电压提升了约80%。     

Elastic,dielectric, and piezoelectric characterization of 0.92Pb(Zn1/3Nb2/3)O3-0.08PbTiO3 single crystal by Brillouin scattering

In this paper,a complete set of elastic,piezoelectric,and dielectric constants of high-quality tetragonal poled0.92Pb(Zn_(1/3)Nb_(2/3))O_3-0.08PbTiO_3 single crystal grown by the modified flux method is determined using high-resolution Brillouin scattering.A comparison is made between the results obtained by a hybrid method combining ultrasonic and resonant techniques and the results obtained by the Brillouin scattering.The elastic,piezoelectric,and dielectric constants obtained by the two methods are similar.The Brillouin spectrum consists of one longitudinal and two transverse acoustic phonon modes,and the variations of the Brillouin shifts,the full widths at half maximum,and the scattering intensities of these modes with scattering angle 9 are investigated.In particular,the transverse acoustic phonon mode at the lowfrequency becomes markedly soft from 28.2 GHz to 18.4 GHz and broadens gradually with the increase of θ,while its intensity decreases gradually as compared with that of the original one.The possible origins of the results are discussed.     

Improving the gas barrier,mechanical and thermal properties of poly(vinyl alcohol) with molybdenum disulfide nanosheets

New multifunctional materials with both high structural and gas barrier performances are important for a range of applications. Herein we present a one‐step mechanochemical process to prepare molybdenum disulfide (MoS₂) nanosheets with hydroxy functional groups that can simultaneously improve mechanical strength, thermal conductivity, and gas permittivity of a polymer composite. By homogeneously incorporating these functionalized MoS₂ nanosheets at low loading of less than 1 vol %, a poly(vinyl alcohol) (PVA) polymer exhibits elongation at break of 154%, toughness of 82 MJ/m³, and in‐plane thermal conductivity of 2.31 W/m K. Furthermore, this composite exhibits significant gas barrier performance, reducing the permeability of helium by 95%. Under fire condition, the MoS₂ nanosheets form thermally stable char, thus enhancing the material's resistance to fire. Hydrogen bonding has been identified as the main interaction mechanism between the nanofillers and the polymer matrix. The present results suggest that the PVA composite reinforced with 2D layered nanomaterial offers great potentials in packaging and fire retardant applications. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 406–414     

Hydrogel-Derived Honeycomb Ni3S4/N,P-C as an Efficient Oxygen Evolution Catalyst

The development of high-efficiency electrocatalysts with low costs for the oxygen evolution reaction (OER) is essential, but remains challenging. Herein, a new synthetic process is proposed to prepare Ni₃S₄ particles embedded in N,P-codoped honeycomb porous carbon aerogels (Ni₃S₄/N,P-HPC) through a hydrogel approach. The preparation of Ni₃S₄/N,P-HPC begins with the sol–gel polymerization of tripolyphosphate, chitosan, and guanidine polymer that contains metal-binding sites, allowing for the uniform incorporation of Ni ions into the gel matrix, freeze-drying, and subsequent carbonization under an inert atmosphere. This synthesis resolves difficulties in synthesizing the pure Ni₃S₄ phase caused by the instability of Ni₃S₄ at high temperature, while affording good control of the porous structure and N,P-doping of carbon aerogels. The synergy between the structural advantages of N,P-carbon aerogels (such as easily accessible active sites, high specific surface area, and excellent electron transport) and the intrinsic electrochemical properties of Ni₃S₄ result in the outstanding OER performance of Ni₃S₄/N,P-HPC, with overpotentials as low as 0.37 V at 10 mA cm⁻². The work outlined herein offers a simple and effective method for the development of carbon-based electrocatalysts for renewable energy conversion.